How to Set Up, Operate, and Store the Active 2.3 Pressure Washer
The Active 2.3 Pressure Washer is a powerful and efficient tool for all your cleaning needs. To get the most out of your unit, follow this step-by-step guide on setup, operation, maintenance, and winterization to keep your pressure washer in top shape.
Setting Up the Active 2.3 Pressure Washer
-
Attach the High-Pressure Hose:
- Locate the pump outlet on the unit, marked by a brass male threaded connector.
- Connect the hose by turning it clockwise on the pump outlet until hand-tight.
- Repeat this process on the spray gun, attaching the hose to the gun’s inlet.
-
Connect the Water Supply:
- Locate the water inlet on the unit, marked by a female brass connector.
- Attach your garden hose, ensuring it is securely connected and hand-tightened.
- Turn on the water supply before activating the unit to prevent pump damage.
-
Prepare the Spray Gun and Tip:
- Connect the metal wand to the spray gun by turning it counterclockwise until tight.
- Select your desired spray tip, slide back the wand’s collar, insert the tip, and release the collar to lock it in place.
Powering Up and Testing the Active 2.3
- Power Supply Connection: Plug in the unit, press the GFCI’s test button, then the reset button to activate the GFCI safety feature.
- Purge Air from Lines: With the unit off, release the trigger lock, squeeze the trigger until a steady stream flows, then switch the unit on.
- Start Cleaning: With TSS (Total Stop System), the motor automatically stops when the trigger is released, ensuring energy efficiency and motor longevity.
Switching Tips and Adding a Foam Cannon
- Switching Spray Tips: Engage the safety lock, remove the current tip, insert the new one, and disengage the safety lock to continue cleaning.
- Connecting a Foam Cannon: Remove the current nozzle, fill the foam cannon bottle with detergent, attach it to the wand, and apply the detergent to dry surfaces for maximum cleaning power. Rinse the cannon with clean water after use.
Proper Shutdown and Storage of Your Pressure Washer
- Shut Down the Unit: Turn off the water supply, pull the trigger to release pressure, switch the unit off, unplug, and engage the gun’s safety lock.
- Disconnect and Store Components: Detach the hoses, wand, and gun, and store all parts in a cool, dry location.
Winterizing Your Active 2.3 Pressure Washer
If you live in a region where temperatures drop below freezing, it’s essential to winterize your pressure washer to prevent internal damage caused by freezing water. Here’s how:
-
Antifreeze Canister Method:
- Connect the antifreeze canister to the unit’s inlet adapter.
- Press the canister button until fluid exits the pressure hose, then disconnect the hose.
-
Manual Method (if no antifreeze):
- Disconnect all water connections, turn the unit on briefly to expel remaining water, then power it off immediately.
- Store the unit in a room above freezing, away from heat sources that could dry out seals.
With proper setup, operation, and maintenance, your Active 2.3 Pressure Washer will serve you well for years to come. Happy cleaning!