How to Fix Low or Fluctuating Pressure in Your Active 2.0 Pressure Washer
Welcome to the Active 2.0 Support Blog Series. Today, we’ll be addressing a common issue users experience—low or fluctuating pressure in their Active 2.0 electric pressure washer. If you’ve noticed inconsistent performance, don’t worry! This guide will help you diagnose and resolve the problem.
Step 1: Check Your Water Supply
The most common cause of low or fluctuating pressure in your pressure washer is a problem with the water input. To ensure your water supply is sufficient, ask yourself the following questions:
- Is your water source pressure between 40 and 100 psi, with a flow rate of at least 4 gallons per minute (GPM)? While city water typically meets this requirement, it's essential to check if you’re using a well or tank water source.
- Are there any leaks in your garden hose or other water connections that may be affecting water pressure?
- Is your garden hose free of kinks, twists, or blockages?
- Have you checked the pressure washer’s hose filter for debris? If it’s clogged, it could cause a drop in water flow, leading to inconsistent pressure.
After verifying that your water supply is sufficient, move on to the next steps if the problem persists.
Step 2: Eliminate Air from the System
If your water supply checks out, air trapped in the system might be causing the pressure fluctuations. Air inside the washer can create drops or inconsistencies in pressure, especially during the first few minutes of operation. Here's what to do:
- While using the pressure washer, notice if the problem occurs within the first five minutes of use. If so, air bubbles in the washer lines may not have been fully purged.
- Before turning the unit on, make sure to purge the air from the system. You can do this by connecting the water source and squeezing the trigger on the pressure washer gun until a steady flow of water comes out without any sputtering or interruptions.
- Keep in mind that uneven water flow is a telltale sign of air in the system, which could lead to inconsistent performance until the air is purged.
Step 3: Check for Internal Leaks
In some cases, internal leaks within the pressure washer can cause water to bypass the pump’s valves, leading to fluctuating pressure. If you’ve ruled out issues with the water supply and air in the system, it may be time to inspect the unit itself for leaks or malfunctions in the pump.
Conclusion
If you’ve followed these steps and are still experiencing low or fluctuating pressure with your Active 2.0 pressure washer, feel free to reach out to us. Our support team is here to help at support@activeproducts.com. Thanks for reading, and we hope these tips get your pressure washer back to peak performance. See you in the next blog!