How to Troubleshoot Accessory Issues in Your Active 2.0 Pressure Washer
Welcome to the Active 2.0 Support Blog Series. In today’s guide, we’ll be covering how to identify and troubleshoot accessory issues you might encounter with your Active 2.0 pressure washer. Whether you’re dealing with a kinked hose, a leaky gun, or a defective nozzle, this step-by-step guide will help you get your pressure washer back to optimal performance.
Troubleshooting Hose Issues
The rubber hose included with the Active 2.0 is built for rugged use, but that doesn’t mean it’s entirely immune to problems. The most common issue with hoses is kinking, which can weaken the hose and eventually lead to a burst.
Checking for Kinks and Damage:
- Inspect the entire length of the hose, looking for creased, discolored, or kinked areas.
- Once a hose has been kinked, it tends to return to that position during use. Make sure to straighten out the hose whenever you spot kinks.
If your hose has developed a split or started leaking, unfortunately, there’s no way to repair it. In this case, the hose will need to be replaced.
Troubleshooting Leaking Gun Issues
If you notice leaking from your spray gun, it’s crucial to determine where the leak is coming from:
Leaking from Connections:
- Ensure all connections are secure and the O-rings at the connection points are intact.
- Inspect the threads and connections for any visible damage that could cause leaks.
Leaking from the Nozzle (When the Trigger Is Not Pressed):
- First, confirm that the trigger isn’t stuck in a pressed position.
- If the trigger isn’t the issue, try swapping out the spray tip. If the leak persists, there is likely a problem with the gun’s valve, and the gun will need to be replaced.
Troubleshooting Nozzle Issues
If you experience inconsistent spray or if a nozzle doesn’t spray at all, this could be a sign of a defective nozzle. Here’s how to troubleshoot:
Clearing Clogged Nozzles:
- Use the included cleaning needle to clear any obstructions in the nozzle’s orifice.
- If the nozzle still doesn’t work after cleaning, check if the issue is isolated to that nozzle by using a different one.
If other nozzles work correctly but the problem persists with the specific nozzle in question, it is likely defective and should be replaced.
Conclusion
By following these steps, you should be able to resolve common accessory issues with your Active 2.0 pressure washer. If you still encounter problems or need further assistance, don’t hesitate to reach out to us at support@activeproducts.com. We’re here to help!