How to Replace the Inlet and Outlet of the Active 2.3 Pressure Washer Pump

How to Replace the Inlet and Outlet of the Active 2.3 Pressure Washer Pump

How to Replace the Inlet and Outlet of the Active 2.3 Pressure Washer Pump

In this guide, we will show you how to replace the inlet and outlet of the Active 2.3 pressure washer pump. Over time, these parts may wear out due to thread damage or surface corrosion, so it’s crucial to know how to replace them to keep your washer in top condition.

Why Replace the Inlet or Outlet?

Inlets and outlets often need replacement due to wearing or corrosion. Additionally, the outlet in particular houses essential components like the unloader spring and valve, making its replacement even more crucial for maintaining optimal pressure washer function.

Tools You’ll Need

  • Small pick tool
  • Size 10 Allen key
  • Fastening glue/sealant
  • Adjustable wrench

Step-by-Step Guide to Replacing the Inlet

  1. Remove the inlet filter screen: Use the pick tool to carefully remove the inlet filter screen.
  2. Loosen the inlet nut: Use a size 10 Allen key to turn the nut counterclockwise, loosening it.
  3. Remove the inlet kit: Take out the entire inlet kit assembly and prepare the new inlet kit for installation.
  4. Apply sealant: Apply fastening glue or sealant around the exterior of the new inlet plug.
  5. Install the inlet construction: Insert the new inlet kit and use the Allen key to tighten it securely.
  6. Reattach the filter screen: Place the water filter screen over the newly installed inlet cover.

Step-by-Step Guide to Replacing the Outlet

  1. Remove the outlet: Use an adjustable wrench to rotate the outlet counterclockwise and remove it.
  2. Take out the unloader components: You’ll find an O-ring around the outlet. Remove this along with the unloader valve and spring inside the pump.
  3. Install the new unloader valve: Place the new spring, valve, and outlet in that order.
  4. Tighten the outlet: Ensure the O-ring is placed correctly on the outlet plug, then use the adjustable wrench to secure it in place.

Final Tips

Replacing the inlet and outlet on your Active 2.3 pressure washer pump can extend the lifespan of your equipment and maintain its performance. Be sure to check these parts periodically to keep your washer functioning smoothly.