Active 3.0 Electric Pressure Washer Fixed Wall Mount & Accessory Solution (75’ Hose)

The bundle ships from our warehouse in Kansas City, MO with each item in its own
packaging. So you should see multiple tracking numbers for your shipment. If
you are ordering a 75’ or 100’ hose option, you will have the accessories
shipped in individual boxes.

The Active 3.0 is designed to run on a 20A circuit and comes with a plug required to plug into a dedicated 20A circuit rated at 120V/60Hz. We discourage the use of extension cords, but if one must be used, we recommend using an extension cord not longer than 50’ and it must be rated for 12AWG. When using foam cannons, we'll be providing a 1.65 mm nozzle with the 3.0, so users can work with their aftermarket foam cannons while maintaining the current draw under 18A.

You can use any aftermarket hose with the Active 2.3 as long as it is compatible with the M22-14mm outlet adapter and has a minimum internal diameter of 5/16”. We do not recommend the use of ¼” hoses with the Active 3.0. The preferred hose type and length is a steel braided rubber hose(5/16” or bigger) under 100 ft. in length. Non-steel braided hoses may expand under pressure and prevent the pressure washer from reaching its peak pressure (continuous running).

The Active 3.0 comes with a 6.3 orifice size. This is done to ensure the machine outputs the best balance of pressure and flow under 18A current draw. If you are to change the nozzles for varying applications, we recommend the use of nozzles between 6.3 to 7.0.

The Active 3.0 requires user care and maintenance for prolonged use. When receiving the unit, please ensure to swap the shipping plug with the ventilation cap. Ensure you use 85W-90 oil. The oil change needs to be done after 25 hours of use and every 100 hours or 6 months thereafter (whichever comes first).